New high-resolution thermal imaging cameras with endoscopic optics for combustion chambers

DIAS Infrared is a leader in the field of infrared thermal imaging cameras PYROINC with borescope and endoscope optics for non-contact temperature measurement in industrial combustion chambers. The camera systems can measure temperatures from 400 °C to 1800 ° C in different spectral ranges:

Near infrared range (NIR): 0.8 µm to 1.1 µm and 1.4 µm to 1.6 µm

Glass melting furnaces

Rotary kilns

Midwave infrared range (MWIR): around 3.9 µm

Temperature measurement through flames

Detection of excessive slag formation

Longwave infrared range (LWIR): around 10.6 µm

Aluminum and zinc recycling

Two new high-resolution endoscope thermal imaging cameras PYROINC 1920N (1920 x 1080 pixels) and PYROINC 1600N (1600 x 1200 pixes) have been developed especially for temperature measurements of glass melts and for checking the brick lining of glass melting furnaces. They measure temperatures from 1100 ° C to 1800 ° C in the NIR spectral range from 0.8 µm to 0.9 µm.

PYROINC with automatic retraction system on a glass melting furnace

The endoscope optics with a stainless steel probe cooling jacket has a diameter of only 60.3 mm (length 1040 mm), which is cooled with water. The inlet aperture for the infrared radiation has a patented air purging unit and has a very small diameter. The probe cooling jacket can be pulled directly through the opening in the combustion chamber walls. An automated retraction system guarantees maximum safety even under critical operating conditions. The front part of the probe cooling jacket withstands temperatures of around 1800 ° C.

06.12.2021, Dias

Il materiale informativo del sito è registrato ed appartiene all´azienda o ai terzi che lo hanno fornitoe tutti i diritti sono riservati. Qualsiasi utente che accede a tale materiale può farlo solo ad uso personale e ne è anche responsabile. Ridistribuzione o altro uso commerciale di tale materiale è espressamente proibito. Nel caso in cui il materiale sia stato ceduto da terzi, l´utente concorda di rispettare questi termini di utilizzo specificati. Glass Global non garantisce la veridicità o l´esattezza del contenuto di alcuna informazione o di siti web esterni menzionati nelle stesse.

Should the content or the design of these sites violate third parties rights or legal prescriptions, we kindly ask you to send us a respective message without invoice or cost. We guarantee that passages where the claim is considered as justified will be removed immediately, without any necessity to involve any lawyer into this issue. We will reject any claim caused by submission of a honorary note in this regard without any prior contact and confirmation of the issueby us and we reserve the right ssue counter claim ourselves because of violation of aforesaid conditions.