Glass Industry News

New office building with solar facade becomes a green powerhouse

, Schüco

This new office building in Stuttgart, Germany, known as OWP 12 referring to its address, was created using the newest planning and building methods in accordance with the Cradle to Cradle principle and it shows what energy-plus architecture can do today thanks to the slimline, high performance facade with BIPV.

At the end of the 1990s, German chemist Michael Braungart and American architect William McDonough came up with the Cradle to Cradle concept. With regard to the construction industry, even during the construction phase the clients should think of its future demolition.

In simple terms, the aim is to avoid waste and to use raw materials that, at the end of the property life cycle, will ideally have the same value for new construction projects. For this, all materials used must be, as far as possible, able to be separated into individual materials, able to be dismantled, free of pollutants and recyclable.

BIM for sustainability and prefabrication

The building materials used in the project were documented in detail in a materials passport based on the BIM model. The digital planning also enabled a high level of prefabrication of the modular facade and a series module fabrication that saved time and costs. Despite its technical complexity, the entire facade of OWP 12 was installed in only two-and-a-half weeks.

A mini power station

The e-coFace facade from FKN and Evonik combines high-end thermal insulation with sound reduction and consists of innovative, sustainable materials in several highly insulating layers. The aluminium profiles constructed by Schüco Engineering for this purpose have a basic depth of 90 mm and use the tried and tested internal design with thermal partitions, gaskets and insulation based on the AWS 75 aluminium window system.

The gasket and coupling system from the USC 65 unitised facade series was also used. The building will generate more energy than it uses. The energy generation comes from geothermal and air-heating pumps as well as from photovoltaic units that are both on the roof and integrated into the facade and glazing units.

BIPV in transparent and opaque surfaces

The Schüco BIPV which is on almost 700 square metres of the facade surface on the south and west sides of the building, has an output of around 70 megawatt hours per year. That is about 40 per cent of the PV output. Both transparent, triple-glazed insulating glass BIPV modules with black monocrystalline cells and black monocrystalline BIPV glass-glass modules were used as opaque, forward-mounted units in front of the main facade.

"The requirement to reduce the natural reflection of the PV modules along the motorway due to traffic safety concerns was a challenge," explained Marco Schech, the leading project engineer for BIPV at Schüco. "We then finally found a special cover glass which significantly reduced the reflection, thanks to its unusual surface structure, and fulfilled the official requirements." An interesting side effect is that the solar energy output through this special glass is actually 3% higher.

BIPV as a design element

Schech sees BIPV gaining momentum due to new political requirements and a rethink among clients and companies. BIPV is also growing in popularity amongst developers because it enables interesting design effects and does not limit creativity.

, © Schüco

Il materiale informativo del sito è registrato ed appartiene all´azienda o ai terzi che lo hanno fornitoe tutti i diritti sono riservati. Qualsiasi utente che accede a tale materiale può farlo solo ad uso personale e ne è anche responsabile. Ridistribuzione o altro uso commerciale di tale materiale è espressamente proibito. Nel caso in cui il materiale sia stato ceduto da terzi, l´utente concorda di rispettare questi termini di utilizzo specificati. Glass Global non garantisce la veridicità o l´esattezza del contenuto di alcuna informazione o di siti web esterni menzionati nelle stesse.

Should the content or the design of these sites violate third parties rights or legal prescriptions, we kindly ask you to send us a respective message without invoice or cost. We guarantee that passages where the claim is considered as justified will be removed immediately, without any necessity to involve any lawyer into this issue. We will reject any claim caused by submission of a honorary note in this regard without any prior contact and confirmation of the issueby us and we reserve the right ssue counter claim ourselves because of violation of aforesaid conditions.



Info Grid

Glass studies

Updated worldwide glass study 2024

plants.glassglobal.com

Updated hollow glass study 2024

Request more information

Updated float glass study 2024

Request more information

Further glass market studies

Request more information

Profilo Aziendale



Updated worldwide glass market study 2024 available now for flat, container glass and tableware

We have updated our international studies on flat glass, container glass and tableware for 2024.

This unique software provides a global overview about glass producers and technical details. Easy to use and clear tables summarize information and data about glass makers such as: Glass types: flat glass, container glass, tableware, production capacities in regions and countries, number of furnaces, furnace types, year of construction, glass types and sub-types, products, project information, special news and downloads.

Further databases supplying demoscopic data and import and export data complete the market survey. Based on these data, prepare individual country profiles with information about local production capacities, local market sizes and expected demand in the future.

Request your offer via plants.glassglobal.com.

Updated container glass study 2024

X

Updated float glass study 2024

X

Further glass studies and reports 2024

X