Glass Industry News

“European windows” are in good demand in the USA and Canada

, SWISSPACER

The North American markets are showing an increasing interest in windows “made in Europe”. Two new studies by the institute EMU Systems give European window makers basic information about the peculiarities of overseas markets.

The United States and Canada are catching up in matters of energy-efficient construction. For example, the International Energy Conservation Code (IECC) has for years required buildings to be designed and built to be more airtight and energy efficient. Moreover, the focus is increasingly shifting onto windows.

Their performance matters for the overall energy balance and influences the temperatures on the glass edge – and hence the level of comfort in the home. The US Department of Energy (DoE) requires that attention be paid to the frame materials used in windows, the correct choice of glazing units, as well as the use of good spacer bars.

According to the IECC standard, buildings must have a certain degree of airtightness, which is verified by means of an obligatory blower door test. Consequently, proper moisture management is needed to avoid the precipitation of condensation, mould and other kinds of damage to windows and buildings. This is the main driver for changes such as the elimination of thermal bridges. The trend is given an extra boost by the high claims for compensation that are possible in the American legal system. The risk of damage caused by condensation is not yet fully understood by many planners and companies in North America.

This presents good opportunities for window makers in Europe to turn their gaze overseas. Two studies prepared by the institute EMU Systems in Colorado on behalf of SWISSPACER supply the basic data required. They list the differences between the relevant American and European standards and provide important insights for those looking to engage with the North American and Canadian markets at some point in the future.

In “The Impact of Glass Spacers on Energy Performance and Risk of Condensation in American/Canadian Windows”, five glass spacer bars were combined with nine window frame profiles. The studies investigate the thermal resistance on the frame, the glass edge and across the entire window, as well as the surface temperature at the glass edge on the basis of the locally applicable standards and calculation methods. In some cases, the latter differ significantly from European regulations and designations.  

While, for example, the spacer bars are included in the formula as a separate, purely linear factor in Europe, in North America the spacer bar is considered in the calculation as being a “glass edge” area. This involves calculated a corresponding value for an area with a width of 63.5 mm (2.5 inches) all round. As this overlaps with the “U-frame”, a better spacer bar also results in a better value for the frame. Based on the North American calculation methods, it is possible to improve the U-values of windows by up to 22 percent.

The studies supply relevant results in the area of condensation precipitation in the various climate zones of the North American continent. With a highly efficient spacer bar between the panes, the risk of condensation reduces significantly: thus the temperatures on the glass edge were on average 7.2 °C higher than for aluminium spacer bars across all systems. A maximum improvement of up to 11 °C is possible.

The studies also explain the classifications for the Energy Star label used in the USA and Canada. The requirements are based on climatic zones and primarily measure the U-value of the windows and the solar gain. In Canada, an energy rating factor of at least 40 is also required for new buildings. Even in high-quality profile systems, this is achievable only in conjunction with the best spacer bars available, such as the SWISSPACER Ultimate.   
“The Impact of Glass Spacers on Energy Performance and Risk of Condensation in American/Canadian Windows”, is available now on the website of SWISSPACER.

, © SWISSPACER

Il materiale informativo del sito è registrato ed appartiene all´azienda o ai terzi che lo hanno fornitoe tutti i diritti sono riservati. Qualsiasi utente che accede a tale materiale può farlo solo ad uso personale e ne è anche responsabile. Ridistribuzione o altro uso commerciale di tale materiale è espressamente proibito. Nel caso in cui il materiale sia stato ceduto da terzi, l´utente concorda di rispettare questi termini di utilizzo specificati. Glass Global non garantisce la veridicità o l´esattezza del contenuto di alcuna informazione o di siti web esterni menzionati nelle stesse.

Should the content or the design of these sites violate third parties rights or legal prescriptions, we kindly ask you to send us a respective message without invoice or cost. We guarantee that passages where the claim is considered as justified will be removed immediately, without any necessity to involve any lawyer into this issue. We will reject any claim caused by submission of a honorary note in this regard without any prior contact and confirmation of the issueby us and we reserve the right ssue counter claim ourselves because of violation of aforesaid conditions.



Info Grid

Glass studies

Updated worldwide glass study 2024

plants.glassglobal.com

Updated hollow glass study 2024

Request more information

Updated float glass study 2024

Request more information

Further glass market studies

Request more information

Profilo Aziendale



Updated worldwide glass market study 2024 available now for flat, container glass and tableware

We have updated our international studies on flat glass, container glass and tableware for 2024.

This unique software provides a global overview about glass producers and technical details. Easy to use and clear tables summarize information and data about glass makers such as: Glass types: flat glass, container glass, tableware, production capacities in regions and countries, number of furnaces, furnace types, year of construction, glass types and sub-types, products, project information, special news and downloads.

Further databases supplying demoscopic data and import and export data complete the market survey. Based on these data, prepare individual country profiles with information about local production capacities, local market sizes and expected demand in the future.

Request your offer via plants.glassglobal.com.

Updated container glass study 2024

X

Updated float glass study 2024

X

Further glass studies and reports 2024

X