Nathan Allan Glass Studios Inc
Descrizione Type Size  
Convex: Clear
Convex Glass was produced and developed with the renowned architectural firms of Janson/Goldstein and Front Inc, in NYC. "Convex Glass" is the first real 3D Glass, produced in Geometric type patterns. Both surfaces are shaped so that dimensional viewing can take place from either side of the glass.

Convex Glass can be produced in 1/4", 3/8", 1/2", 5/8" and 3/4" single layered panels, and can be safety tempered as well. For projects that require laminating, Nathan Allan has developed a brand new and unique method of casting panels, that allow the panels to "Fit like a Glove". This process enables Resin Laminating to be successfully applied.

http://www.nathanallan.com/1c_jj/convex/convex.htm
JPG 155.692 byte show
Textures: West Coast: Slate
Currently 55 standard textures are available.

http://www.nathanallan.com/1_nav/textures.htm
JPG 26.790 byte show
Colors: Gemstones: Citrine
Gemstone colors glitter on Freeform textures. Ideal for applications where back lighting is difficult, the pearlescent sheen is best achieved with front lighting.

http://www.nathanallan.com/1_nav/colors.htm
JPG 25.959 byte show
Cathedral: Low Iron
· produced with 3/8” (10mm) thick glass
· available in Clear, Low Iron, Bronze Tint, Grey Tint
· special order custom tints: Blue, Green, Aqua Blue
· all patterns can be safety tempered
· sheet sizes from 2’0 x 2’0 up to 7’0 x 12’6
· patterns can run vertically or horizontally

http://www.nathanallan.com/8_information/info_cathedral.htm
JPG 8.393 byte show
Project Example: Fendi
Crystal Cognac glass; Dorma sliding hardware; tempered vertical panels; tempered and laminated ceiling panels.

Client: Fendi, Rome, Italy
Architect: Peter Marino, New York

http://www.nathanallan.com/4_clients/fendi/client_fendi.htm
JPG 108.592 byte show
Venetian: Serpentine A
· produced with 3/8” (10mm) thick glass
· available in Clear, Low Iron, Bronze Tint, Grey Tint
· special order custom tints: Blue, Green, Aqua Blue
· all patterns can be safety tempered
· sheet sizes from 2’0 x 2’0 up to 7’0 x 12’6
· patterns can run vertically or horizontally

http://www.nathanallan.com/1c_jj/venetian/venetian.htm
JPG 18.100 byte show
Heavy: 2
Produced from 1” to 4” thick. A very unique feature of Nathan Allan Heavy Glass is our Textured edges on the side of the glass.

http://www.nathanallan.com/1c_jj/heavy/heavy.htm
JPG 16.887 byte show
Freeform: Willow
Using casting methods with our exclusive mold materials, Nathan Allan has produced a bold new form of cast glass clear patterns. Freeform glass is essentially textureless cast glass with intricate dimensional patterns. Patterns can run vertically or horizontally, or can be combined to form original and unique designs.

Freeform glass allows for a far greater amount of light to travel through the panels, than existing opaque glass, while still providing privacy. Identically viewed from both sides, the patterns are essentially Low to No-maintenance, with easy to clean features.

http://www.nathanallan.com/1_nav/freeform.htm
JPG 109.705 byte show
Project Example: Big D Construction
80 treads and 20 landings with Cast Glass Checkerplate (Diamondplate) texture. The walking surface has our exclusive Glass Sandpaper safety finish on two layers of 5/8" think, tempered glass. Finished product is engineered and ASTM rated for coefficiency of friction testing.

Client: Big D Construction, Company Headquarters, Salt Lake City, UT
Designers: Gillies Stransky Brems Smith, UT
Photo: Perrenoud Productions, UT

http://www.nathanallan.com/4_clients/bigd/bigd.htm
JPG 149.878 byte show
Tread
Glass Treads, Landing, & Floor Panels

The signature feature here is Glass Sandpaper - the walking surface of glass treads must be safe, and easy to clean. Glass particles are fused onto the walking surface, and provide grip to all shoe treads. Tested in laboratories for co-efficiency of friction ratings, our Glass Sandpaper tested highly in both wet and dry conditions (product data is available).

http://www.nathanallan.com/1b_apps/APPS_stairtreads.htm
JPG 111.487 byte show
Project Example: Marriot Marquis
The Marriott Marquis Hotel incorporates our Crystal Series product in their elevator lobby. Produced with 1/2" tempered glass, Sahara texture, Cognac color finish, and illuminating Crystal Bead backing, the panels are designed to sparkle when light is applied.

Client: Marriot Marquis Hotel, New York
Architect: BBGM, New York
Photo: Roger Hagadone Photography

http://www.nathanallan.com/4_clients/marriotmarquis/elevator.htm
JPG 110.588 byte show
Crystal: Cognac
Crystal Series products are normally produced with 3/8” thick, cast tempered glass. Using patterns from our standard “Textures” category, panels are cast in the selected texture, then Crystal beads are attached to the back of the panels. If chosen, a Color Finish may be applied. Ideal for diffusing light sources.

http://www.nathanallan.com/1c_jj/crystal/jj_crystal.htm
JPG 124.094 byte show
Sphere: Multi
· Spheres can be attached to clear sheets of glass or cast textured sheets of glass
· Clear Sheets: 1’ x 1’up to 7’ x 12’ 6
· Cast Sheets: 1’ x 1’ up to 7’ x 12’ 6, depending upon texture
(some textures are limited to 5’ x 10’ max size)
· Glass Sheets can be safety tempered and/or laminated
· Sheets are 1/4”, 3/8”, 1/2”, 5/8” and 3/4” thick

http://www.nathanallan.com/1c_jj/sphere/sphere.htm
JPG 41.323 byte show